Depending on the model year and body type of attachment are different.

Front bumper

-open the hood.

-take out the caps (can be screws) that secure the grille and the upper bumper section. In early models, take out the clips under the grille.

Depending on the year:

-Unscrew two screws each side and remove the headlights.

-in the opening of the headlight Unscrew the screws that attach the bumper to the wings (if any).

-at the bottom, Unscrew the screws (spun from the bottom up).

-wrenched the wheel left or right, depending on which side of the bed will disassemble.

-wheel arches vacated lockers and Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-s the assistant pulls gently on the bumper itself.

-remove the connectors from the fog lights (if any).

the attachment of the front bumper Nissan Almera N16, B10

the scheme of fastening of the front bumper Nissan Almera N16, B10

Rear bumper

-in the wheel wells, Unscrew the screws and peel the fender liner.

-for wheel arch liners Unscrew one screw on each side (spun upwards) that secure the corner bumper to the wings.

-open the trunk lid and pulls in opening caps.

-at the bottom, Unscrew the screws and take out the caps (twisted and inserted from the bottom up) that secure the lower part.

-with the assistant release the latch in the wings, and gently pulls the bumper itself.

the attachment of the rear bumper Nissan Almera N16, B10

the scheme of fastening of the rear bumper Nissan Almera N16, B10