-open the hood.
-take out the caps (inserted from top to bottom) that secure the grille and the upper bumper section.
-remove the grille (held by the latches).
-on the perimeter at the bottom of the bumper, unscrew the screws and take out the caps (twisted and inserted from the bottom up) that secure the lower part.
-wrenched the wheel to the left or right side, depending on which side of the bed will be dismantled.
-wheel arches take out the rivets that attach the fender liner.
-drawn wheel arches to the side and unscrew one screw on each side (spun upwards) holding the corners to the wings.
-s the assistant pulls gently on the bumper itself.
-remove the connectors from the fog lights (if any).
-open the trunk lid.
-in the opening, take out the clips that secure the upper part.
-in the wheel wells, Unscrew the screws and peel the fender liner.
-remove the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.
-on the perimeter in the bottom part Unscrew the screws and take out the caps (twisted and inserted from the bottom up).
-with the assistant release the latch in the wings, and gently pulls the bumper itself.
-remove connector from the PDC (if any).