-
-
-
Depending on the model year and body type of attachment may vary.
Front bumper
-open the hood.
-under the hood take out the caps and unscrew the screws that attach the top part of the bumper and grille.
-remove the grille and take out beneath the caps.
-at the bottom, take out the caps and unscrew the screws (twisted and inserted from the bottom up) that secure the lower part of the bumper.
-wrenched the wheel left or right, depending on which side of the bed will disassemble.
-wheel arches, release the fender liner.
-the fender liner, unscrew the screws. Holding the bumper to the wings.
-s the assistant pulls gently on the bumper itself.
-remove the connectors from the fog lights (if any).
Rear bumper
-open the tailgate and Unscrew two screws on each side that secure the tail lights.
-remove tail lights and Unscrew the screws under them.
-take out the caps on the perimeter in the lower part (inserted from the bottom up).
-wheel arches vacated lockers and Unscrew the screws holding the corners of the bumper to the wings (spun up).
-assistant exempt the bumper and gently pulls on itself.
-remove the connectors from the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español