Front bumper

-under the hood take out the caps (inserted from top to bottom) that secure the grille.

-under the lights, with a flat head screwdriver, turn the retainers and remove the grille.

-under the radiator grille and pull out the caps.

-on the perimeter at the bottom of the bumper, Unscrew the screws and take out the caps (twisted and inserted from the bottom up).

-wrenched the wheel to the left or right side, depending on which side of the bed will be dismantled.

-wheel arches take out the rivets and removed the fender liner.

- turn down the lockers to the side and Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-assistant release bumper latches and pulls gently on yourself.

-remove the connectors from the fog lights (if any).

the scheme of fastening of the front bumper Nissan Quest E52 (after 2010)

scheme of fastening of the radiator grille Nissan Quest E52 (after 2010)

scheme of fastening of the radiator grille Nissan Quest E52 (after 2010)

Rear bumper

-in the wheel wells, Unscrew the screws and peel the fender liner.

-remove the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.

-on the perimeter in the bottom part Unscrew the screws and take out the caps (twisted and inserted from the bottom up).

-with the assistant release the latch and gently pulls the bumper itself.

-remove connector from the PDC (if any).

the scheme of fastening of the rear bumper Nissan Quest E52 (after 2010)

the scheme of fastening of the rear bumper Nissan Quest E52 (after 2010)