-
-
-
Nissan Armada II (2016-2023)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood take out eight caps and remove the grille (holds on latches, pull towards you).
-under the grille take out the caps (inserted from top to bottom) that secure the upper part of the front bumper.
-from the bottom, unscrew the ten screws that secure the bottom.
-turn the wheels to the side.
-unscrew three screws on each side that secure the wheel arch lining.
-we release the lining of the arches from the bumper (hold on the latches, take the bottom and pull towards you).
-for the fender liner, unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-we release the latches under the headlights.
-with an assistant, remove the bumper forward (be careful not to break the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-near the rear lights, remove the pads (hold on snaps).
-under the overlays, unscrew two screws on each side and remove the rear lights (pull towards you).
-under the rear lights, unscrew the two screws and take out the two pistons.
-from the bottom, unscrew the twelve screws that secure the lower part of the rear bumper.
-in the wheel arches, unscrew the screws and release the lining of the arches from the bumper (hold on latches, pull the bottom towards you).
-we release the fender liner (rear).
-for the fender liner, Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-with an assistant, gently pull the bumper back (be careful not to break the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español