-
-
Depending on the year of release of the attachment can vary.
Front bumper
-open the hood.
-under the hood take out the rivets that secure the lining and radiator grill.
-remove radiator grille.
-under the radiator grille and pull out the caps.
-at the bottom, take out the caps and Unscrew the screws (twisted and inserted from the bottom up) that secure the lower part of the bumper.
-wrenched the wheel left or right, depending on which side of the bed will disassemble.
-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner.
-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the bumper to the wings.
-with the assistant release the latch in the wings and bumper pulls gently on yourself.
-remove the connectors from the fog lights (if any).
-remove connectors with additional electrical equipment (if available).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, remove the lining sidewalls of the rear lights.
-under the covers Unscrew two screws on each side that secure the tail lights.
-remove the rear lights under them and take out one piston on each side.
-take out the caps on the perimeter in the lower part of the bumper (inserted from the bottom up).
-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner.
-attach the fender liner to the side and Unscrew the screws holding the corners of the bumper to the wings (spun up).
-with the assistant release the bumper clips and gently pulls on itself.
-remove the connectors from the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español