Depending on the year of manufacture, the mounting locations may differ.
Front bumper
-from the bottom side, unscrew two screws (twisted from bottom to top).
-turn the wheels to the side.
-in the wheel arches, unscrew the screws that secure the fender liners and bumper corners to the wings.
-then the front bumper can be removed either with or without a metal reinforcement. If without an amplifier, then pull out the caps from the bottom, unscrew the screws behind the license plate and tear the bumper off the latches in the amplifier. If with an amplifier, from the engine compartment side we unscrew the screws that secure the amplifier brackets to the body.
-with an assistant, carefully pull the bumper forward (watch the wires).
-disconnect the connectors of the electrical equipment (if any).