Front bumper
-open the hood, Unscrew the screws and take out the caps (twisted and inserted top to bottom) that secure the upper part of the bumper.
-in the lower part of the bumper take out the caps and Unscrew the screws (twisted and inserted from the bottom up) that secure the lower part.
-wrenched the wheel to the left or right side, depending on which side of the bed will be dismantled.
-wheel arches, peel the fender liner.
-turn down the lockers to the side and Unscrew the screws holding the bumper to the wings.
-with the assistant release the latch in the wings and bumper pulls gently on yourself.
-remove the connectors from the fog lights (if any).
-remove connectors with additional electrical equipment (if available).
Rear bumper
-open the boot lid and Unscrew the aperture screws that secure the top.
-on the perimeter in the bottom part Unscrew the screws and take out the caps.
-in the wheel wells, Unscrew the screws and take out the rivets holding the mudguards and wheel arches (not to remove the wheels easier to turn a ratchet with a nozzle).
-remove the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners to the wings.
-with the assistant release the latch in the wings, and gently pulls the bumper itself.
-remove the connectors from the equipment (if any).