-
-
-
Depending on the model year and body type of attachment may vary.
Front bumper
-open the hood.
-under the hood take out the five rivets that attach the upper part.
-at the bottom, take out the caps and Unscrew the screws (twisted and inserted from the bottom up) that secure the lower part of the bumper.
-wrenched the wheel left or right, depending on which side of the bed will disassemble.
-wheel arches, release the fender liner.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the bumper to the wings.
-with the assistant release the latch in the wings and bumper pulls gently on yourself.
-remove the connectors from the fog lights (if any).
Rear bumper
-open the tailgate and Unscrew two screws on each side that secure the tail lights.
-remove tail lights and Unscrew them under one screw on each side.
-take out the caps on the perimeter in the lower part (inserted from the bottom up).
-wheel arches, peel the fender liner.
-the fender liner, Unscrew the screws holding the corners of the bumper to the wings (spun up).
-with the assistant release the bumper clips and gently pulls on itself.
-remove connectors from electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español