-under the hood we take out two pistons, unscrew two screws and remove the radiator grille (it is held on by clips, you need to loosen the clips and pull the grille towards you)
-remove the direction indicators and pull out the caps under them.
-unscrew the screws in the lower radiator grille.
-from the bottom we unscrew the screws (twisted from bottom to top).
-turn the wheels to the side.
-in the wheel arches, unscrew the screws and release the fender liners.
-behind the fender liners, Unscrew one nut on each side that secures the sides to the wings.
-with an assistant, carefully pull the bumper forward (watch the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the trunk opening we take out the seven pistons that secure the upper part.
-remove the side trim of the trunk.
-behind the skins, unscrew three nuts on each side that secure the sides to the wings.
-from the bottom side, unscrew the screws (twisted from bottom to top).
-unscrew the screws in the wheel arches.
-with an assistant, pull the bumper back (watch the wires).
-disconnect the connectors of the electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español 
