-
-
-
Front bumper
-under the hood, in front of the radiator, remove the three clips that secure the upper part.
-on the perimeter at the bottom of the bumper, Unscrew the screws and take out the caps (twisted and inserted from the bottom up).
-wrenched the wheel to the left or right side, depending on which side of the bed will be dismantled.
-wheel arches, peel the fender liner.
-turn down the lockers to the side and Unscrew the screws, which fasten the corners of the bumper to the wings.
-with the assistant release the latch in the wings and bumper pulls gently on yourself.
-remove the connectors from the fog lights (if any).
-remove connector from the PDC (if any).
Rear bumper
-open tailgate and remove rear paneling (take out the four clips, pull the trim upwards).
-remove the side trim (you need to access the rear part of the rear lights).
-for casings, Unscrew the nuts and remove the rear lights (lights sit very tightly in the seats, you need shaking from side to side pull).
-the rear lights take out the caps (inserted upside down)
-on the perimeter in the bottom part Unscrew the screws and take out the caps (twisted and inserted from the bottom up).
-wheel arches, peel the fender liner.
-remove the fender liner to the side and Unscrew one screw on each side that attach the bumper to the wings.
-with the assistant release the latches in the cargo space's opening and gently pulls the bumper itself.
-remove the electrical connectors (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español