Depending on the model year and body type of attachment are different.

Front bumper

-open the hood.

-pulls under the hood of five caps (inserted from top to bottom) that secure the upper part.

-Unscrew the screws and take out the caps (twisted and inserted from the bottom up) around the perimeter at the bottom.

-wrenched the wheel to the left or right side, depending on which side of the bed will be dismantled.

-wheel arches take out the rivets that attach the fender liner.

-remove the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.

-with the assistant release the latch in the wings (pull on yourself) and gently pulls the bumper itself.

-remove the connectors from the fog lights (if any).

-remove connector from the PDC (if any).

the attachment of the front bumper Nissan Tiida C12 (Versa) (after 2011)

the scheme of fastening of the front bumper Nissan Tiida C12 (Versa) (after 2011)

the scheme of fastening of the front bumper Nissan Tiida C12 (Versa) (after 2011)

Rear bumper

-open the trunk lid.

-remove tail lights.

-the rear lights take out one piston and Unscrew one screw on each side.

-on the perimeter in the lower part and pull out the caps and Unscrew the screws (inserted and spun up).

-wheel arches take out the rivets that attach the fender liner.

-remove the fender liner to the side and Unscrew one screw on each side (spun upwards) that attach the bumper to the wings.

-with the assistant release the latch in the wings (pull the corners themselves), and gently pulls the bumper itself.

-remove the electrical connectors (if any).

the attachment of the rear bumper Nissan Tiida C12 (Versa) (after 2011)

the scheme of fastening of the rear bumper Nissan Tiida C12 (Versa) (after 2011)

scheme of fastening of tail light Nissan Tiida C12 (Versa) (after 2011)