Nissan 350Z (2002-2009)
Front bumper
-open the hood.
-under the hood take out the six caps that secure the upper part of the front bumper.
-from the bottom, take out the caps and Unscrew the four screws that secure the bottom.
-turn the wheels to the side.
-wheel arches take out the caps and release the fender liner (front).
-for the fender liner, unscrew two screws on each side that secure the corners of the bumper to the wings.
-with an assistant, remove the bumper (be careful not to break the wires).
-disconnect electrical connectors (if any).
Rear bumper
-open the trunk lid.
-unscrew three screws on each side and remove the rear lights.
-under the rear lights, unscrew the two screws and take out the two pistons.
-wheel arches take out the caps that secure the fender liner.
-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings.
-unscrew the screws from the side of the bottom that secure the lower part.
-with an assistant, gently pull the bumper back (be careful not to break the wires).
-disconnect electrical connectors.