Depending on the year of manufacture, the mounting locations may vary.
Front bumper
-open the hood.
-under the hood, release the latches (you need to turn them ninety degrees with a flat screwdriver), release them from the latches and remove the radiator grille.
-behind the radiator grille, unscrew the screws, release them from the latches and remove the radiator shutter.
-between the headlights we take out the caps that secure the upper part of the bumper (plastic).
-turn the wheels to the side.
-take out the caps that secure the fender liners (front part).
-behind the fender liners, unscrew one screw on each side (twisted from bottom to top), release it from the latches in the wings and remove the upper part of the bumper (plastic).
-disconnect the connectors of the electrical equipment (if necessary, release the wiring harnesses).
-in the wheel arches, unscrew two bolts on each side that secure the bumper brackets to the frame.
-in the front part of the bumper we take out the decorative plugs and unscrew three bolts under them on each side.
-with an assistant, carefully pull the bumper forward.
Rear bumper
-we release the connectors for the license plate lighting and parking sensors (if equipped), if necessary, we release the wiring harnesses.
-unscrew the six bolts that secure the bumper brackets to the side members.
English 
Italiano 
Français 
русский 
Deutsch 
Español 
