Nissan Leaf II (2017-2023) bumper removal.

Nissan Leaf II (ZE1) (2017-2023)

Front bumper

-open the hood.

-under the hood take out nine caps (inserted from top to bottom) and remove the trim.

-open the charging hatch and remove the protective cover.

-take out the four pistons, release them from the latches and remove the trim in front of the charging port.

-under the trim take out the caps that secure the upper part of the bumper.

-from the bottom, unscrew the eleven screws (spun up) that secure the engine protection and fender liner.

-turn the wheels to the side.

-in the wheel arches, we release the fender liner (the front part must be pulled towards you).

-for the fender liner, unscrew one screw on each side (spun up) that secure the corners of the front bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the clips under the hood.

-with an assistant, gently pull the bumper forward (look behind the wires).

-disconnect the connectors of the parking sensors and fog lights.

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the four screws.

-from the bottom, unscrew the six screws (spun up).

-in the wheel arches, we release the fender liner (rear).

-unscrew one screw on each side that attach the corners of the rear bumper to the wings.

-we release the latch in the wings (pull the corners towards you).

-we release the latches under the rear lights.

-with an assistant, gently pull the bumper back (look behind the wires).

-disconnect the parking sensors connectors (if any).

How to remove front and rear bumper Nissan Leaf I (ZE0/AZE0) (2010-2017)