Nissan 370Z (2008-2020)
Front bumper
-open the hood.
-under the hood take out six caps and remove the trim.
-under the trim take out the six caps that secure the upper part of the front bumper.
-from the bottom, unscrew the ten screws that secure the bottom.
-turn the wheels to the side.
-wheel arches take out the caps and release the fender liner (front).
-for the fender liner, unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-release the latches in the wings (pull the corners towards you)
-with an assistant, remove the bumper (be careful not to break the wires).
-disconnect electrical connectors (if any).
Rear bumper
-open the trunk lid.
-remove the pads near the rear lights (hold on latches).
-under the covers, unscrew the four screws.
-from the trunk, unscrew the nuts and remove the taillights.
-under the rear lights take out two pistons on each side.
-take out the two pistons in the opening of the trunk.
-wheel arches take out the caps that secure the fender liner (rear).
-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings (spun up).
-unscrew the screws and take out the caps from the bottom that secure the lower part of the rear bumper.
-we release the latch in the wings (pull the corners towards you).
-with an assistant, gently pull the bumper back (be careful not to break the wires).
-disconnect electrical connectors.