Nissan NV200 bumper removal.

Nissan NV200 (2009-2023)

Depending on the year of manufacture, the attachment points may differ.

Front bumper

-open the hood.

-under the hood take out four pistons (inserted from top to bottom) that secure the grille.

-we release the caps with a square cap, you need to turn 90 degrees with a flat screwdriver and pull the grill towards you.

-we release the lower part from the latches and remove the grille (pull towards you).

-take out two pistons and remove the pads (parts of the bumper) under the headlights (hold on latches, pull towards you).

-for lining, below the headlights, take out two pistons.

-take out the six caps (inserted from top to bottom) that secure the top of the front bumper.

-from the bottom, unscrew the screws (spun up) that secure the bottom.

-turn the wheels, depending on which side we will disassemble.

-in the wheel arches, we release the fender liner (front).

-for the fender liner, unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).

-with an assistant, gently pull the bumper forward (look behind the wires).

-disconnect the fog lamp connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the two screws and take out the four pistons that secure the upper part of the rear bumper.

-from the bottom, take out the three pistons and unscrew the two screws (twisted and inserted from the bottom up).

-in the wheel wells, unscrew one screw on each side (spun up) that attach the corners to the wings.

-we release the latch in the wings (pull the corners towards you).

-with an assistant, gently pull the bumper back (look behind the wires).

-disconnect electrical connectors (if any).