-
-
-
Front bumper
-open the hood.
-under the hood we take out thirteen pistons (inserted from top to bottom), which secure the trim and the upper part of the bumper (radiator grille).
-from the bottom we take out the pistons and unscrew the screws that secure the lower part.
-turn the wheels to the side.
-release the fender liners (front part).
-behind the fender liners, Unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-release the latches in the wings (pull the corners toward you).
-release the latches under the headlights.
-with an assistant, carefully pull the bumper forward (make sure not to break the wires).
-disconnect the electrical connectors.
Rear bumper
-open the trunk lid.
-we release the side trim of the trunk.
-behind the casings, unscrew the nuts and remove the rear lights.
-under the rear lights, pull out one piston and unscrew one screw on each side that secures the upper part of the rear bumper.
-from the bottom, unscrew the screws and take out the pistons (twisted and inserted from the bottom up) that secure the lower part.
-in the wheeled ones, release the fender liners (rear part) and unscrew one screw on each side, which is the corner of the bumper to the wings.
-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper back (watch the wires).
-disconnect the connectors of the electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español