-open hood and hatch for charging.
-take out the caps (inserted from top to bottom) that secure the top and the screws underneath the hatch.
-at the bottom, take out the caps and Unscrew the screws (twisted and inserted from the bottom up) that secure the lower part of the bumper.
-wrenched the wheel left or right, depending on which side of the bed will disassemble.
-wheel arches, release the fender liner.
-Unscrew one screw on each side (spun upwards) holding the bumper to the wings.
-with the assistant release the latch in the wings and bumper pulls gently on yourself.
-remove the connectors from the fog lights (if any).
-remove connector from the PDC (if any).
-open the trunk lid and on the corners of the opening, Unscrew the two screws.
-Unscrew the screws around the perimeter at the bottom.
-wheel arches Unscrew the screws that attach the angles to the wings.
-assistant free the bumper from the clips in the wings and gently pulls on itself.
-remove the connectors from the equipment (if any).