Nissan Bluebird XI (1996-2001)
Depending on the year of manufacture, the attachment points may differ.
Front bumper
-open the hood.
-release from the latches (pull towards you) and remove the grille.
-under the grille take out the three clips that secure the upper part of the front bumper.
-from the bottom, unscrew the screws (spun up).
-turn the wheels, depending on which side we will disassemble.
-in the wheel arches, we release the fender liner (front).
-for the fender liner, unscrew one screw on each side (spun up) that attach the corners to the wings.
-with an assistant, gently pull the bumper forward (be careful not to break the wires).
-disconnect the connectors from the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk take out the three pistons that secure the upper part of the rear bumper.
-unscrew the screws in the inner part of the wings.
-from the side of the bottom we take out five caps that secure the lower part.
-in the wheel arches, we release the fender liner (rear).
-unscrew one screw on each side that secure the sides of the bumper.
-with an assistant, gently pull the bumper back (look behind the wires).
-disconnect electrical connectors (if any).