-
-
-
Nissan Altima VI (L34) (2018-2023)
Front bumper
-open the hood.
-under the hood, take out twelve caps and remove the trim over the front bumper.
-under the overlay we take out two pistons (inserted from top to bottom) that secure the upper part.
-from the bottom, unscrew the eight screws and take out the six caps that secure the fender liner and engine protection.
-turn the wheels to the side.
-in the wheel arches, we release the fender liner from the bumper (front).
-for the fender liner, unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-we release the latches under the headlights.
-with an assistant, remove the bumper forward (be careful not to break the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-we release the side trim of the trunk (rear).
-for the skins, unscrew two nuts on each side and remove the rear lights (pull towards you).
-under the rear lights, unscrew the two screws and take out the two pistons.
-from the bottom we take out nine caps that secure the lower part of the rear bumper.
-unscrew two screws on each side that secure the mud flaps.
-in the wheel arches, we release the fender liner (rear).
-for the fender liner, unscrew one screw on each side that secures the corners of the bumper to the wings (spun up).
-we release the latch in the wings (pull the corners towards you).
-with an assistant, gently pull the bumper back (be careful not to break the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español