How to remove front and rear bumper Toyota Corolla Rumion

The attachment points may differ depending on the year of manufacture.

Front bumper

-open the hood.

-under the hood, take out five rivets and remove the trim over the radiator grill.

-under the cover, Unscrew the four screws and take out the five rivets that secure the upper part of the bumper and the radiator grill.

-Unscrew the eight screws (screwed from bottom to top) that secure the lower part.

-wheel the wheels to the side.

-in the wheel arches, take out the caps (tedious to turn 90 degrees) and one screw on each side that attach the corners of the bumper to the wings.

-release the latches in the wings (pull the corners of the bumper towards you).

-with the assistant, we pull the bumper forward (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

Rear bumper

-open the trunk lid.

-in the trunk opening, behind the plugs, unscrew the two screws.

-from the bottom, take out the four pistons (inserted from bottom to top) that secure the bottom of the bumper.

-in the wheel arches, take out the rivets (you need to turn them 90 degrees) that secure the wheel arch liners (rear part).

- one screw on each side that secures the corners of the bumper.

-release the latches in the wings (pull the corners of the bumper towards you).

-release the latches under the rear lights.

-with an assistant, we pull the bumper back (look behind the wires).

-disconnect the connectors of the electrical equipment.

How to remove front and rear bumper Toyota Corolla Verso