-
-
-
Toyota Yaris Verso (1999-2005)
Depending on the year of manufacture, the attachment points differ slightly.
Front bumper
-open the hood.
-under the hood take out the caps and remove the grille up.
-take out the caps, release the clips and remove the panels above the bumper.
-take out the piston under the grille.
-on the perimeter of the lower part, unscrew the screws and take out the caps (twisted and inserted from the bottom up).
-turn the wheels to the side.
-in the wheel wells, unscrew the screws that secure the fender liner (front).
-for the fender liner, unscrew one screw on each side (spun up) that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the two screws and take out the caps.
-in the wheel wells, unscrew the screws that secure the fender liner (rear).
-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-at the bottom of the bumper take out the caps (inserted from the bottom up).
-we release the clips in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español