Toyota Hilux VIII AN120 / AN130 (2015+)
Depending on the year of manufacture and body type, the attachment points may differ.
-open the hood.
-under the hood take out eight caps and remove the trim over the grille.
-under the trim, Unscrew the four screws that secure the grille.
-(depending on the year of manufacture) remove the grille (the lower part is held on by latches).
-behind the grille, Unscrew the three screws.
-around the bottom of the bumper, take out the caps and Unscrew the screws (twisted and inserted from the bottom up).
-turn the wheels to the side.
-in the wheel wells take out the caps and Unscrew the screws that secure the fender liner (front) and bumper corners to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors (if any).
-from the bottom side, behind the bumper, Unscrew two bolts on each side that secure the bumper amplifier brackets to the body.
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.