Depending on the year of manufacture, the attachment points may differ.

Front bumper

-open the hood.

-under the hood, Unscrew the four screws and remove the grille up.

-under the grille take out three pistons (inserted from top to bottom).

-on the perimeter of the lower part of the bumper, Unscrew the four screws and take out the four pistons (twisted and inserted from the bottom up).

-in the lower grille, Unscrew the two screws.

-turn the wheels to the side.

-in the wheel wells take out the caps that secure the fender liner (front) and Unscrew the screws that secure the corners of the bumper.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors.

Front bumper mounting scheme Toyota Alphard (2002-2008)

 

Rear bumper

-open the trunk lid.

-unscrew two screws on each side and remove the rear lights (held by latches).

-in the opening of the trunk, Unscrew the four screws.

-in the side trims, Unscrew two screws on each side and remove the trunk lid guides.

-remove the lining of the rear trunk panel.

-behind the casing, through the holes, Unscrew the two nuts.

-around the perimeter of the lower part of the bumper take out the caps.

-in the wheel wells, Unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the latches in the wings and under the taillights (blue arrows, pull the corners of the bumper and the sides of the lining towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).

Rear bumper mounting scheme Toyota Alphard (2002-2008)