How to remove front and rear bumper Toyota Tacoma (2016+)

Toyota Tacoma III N300 (2016+)

Depending on the year of manufacture and body type, the attachment points may differ.

Front bumper

 

-open the hood.

-under the hood, unscrew the two screws and take out the two pistons (twisted and inserted from top to bottom).

-remove the grille (the lower part of the grille is held on by latches).

-under the grille, unscrew the six screws.

-on the perimeter of the lower part, Unscrew the screws (spun up).

-turn the wheels to the side.

-in the wheel wells, take out the caps and unscrew the screws that secure the fender liner (front) and the sides of the bumper.

-we release the lining of the wings from the bumper (hold on the latches, pull the bottom towards you).

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect the fog lamp connectors.

Front bumper mounting scheme Toyota Tacoma III N300 (2016+)

 

Rear bumper

 

-from the bottom side, unscrew the screws that secure the bumper amplifier brackets to the body.

-release electrical connectors.

-with an assistant, pull the bumper back.

Rear bumper mounting scheme Toyota Tacoma III N300 (2016+)

 

How to remove front and rear bumper Toyota Tacoma (2005-2015)