How to remove the front and rear bumper Toyota Alphard (2015+)

Depending on the year of manufacture, the attachment points may differ.

Front bumper

-open the hood.

-under the hood take out the caps and remove the trim over the grille.

-under the trim, Unscrew the screws that secure the upper part of the bumper and grille.

-in the front of the bumper, below the grille, Unscrew the two screws

-at the bottom of the bumper, Unscrew the screws and take out the caps (twisted and inserted from the bottom up).

-turn the wheels to the side.

-in the wheel arches we take out the caps that attach the fender liner (front) and the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors.

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the four screws (or six, depending on the type of body and year).

-at the bottom of the bumper take out nine caps (inserted from the bottom up).

-in the wheel arches, we release the fender liner (rear part) and take out the caps that attach the corners of the bumper to the wings.

-we release the latches in the wings and under the rear lights (pull the corners of the bumper and the sides of the lining towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).

How to remove the front and rear bumper Toyota Alphard (2002-2008)

How to remove the front and rear bumper Toyota Alphard (2008-2015)