Front bumper

Depending on the model year and model type, the attachment differs.

-open the hood, Unscrew the screws and take out the caps (twisted and inserted top to bottom) that attach the bumper to the top of the bar.

-Unscrew the screws on the perimeter in the bottom (spun up).

-wrenched the wheel to the left or right side depending on which side we will analyze first.

-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner.

-with the aide of tear the corners with the locks in the wings and pulls the bumper from the guides themselves.

-if you have headlight washers, detach the hoses from the injectors. The liquid leaking on the ground, you need to prepare a suitable container or tube.

-remove connector from the PDC (if any).

-remove the connector from the fog lamp (if any).

the attachment of the front bumper of the Toyota Auris

the scheme of fastening of the front bumper of the Toyota Auris

Rear bumper

-open the boot lid and Unscrew one screw on each side in the doorway.).

-wheel arches take out the caps.

-take out the caps on the perimeter in the lower part (inserted from the bottom up).

-assistant free the bumper from the clips in the wings and pulled off of the guide itself.

-if you have sensors, remove the connector.

the attachment of the rear bumper of the Toyota Auris

the scheme of fastening the rear bumper of the Toyota Auris