-
-
-
Toyota Prius IV XW50 (2015-2022)
Depending on the year of manufacture and mounting location may vary.
Front bumper
-open the hood.
-under the hood take out the caps and remove the trim.
-under the trim take out the caps (inserted from top to bottom) that secure the upper part of the bumper.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-turn the wheels to the side.
-in the wheel arches, we release two latches that secure the fender liner (front).
-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk take out two pistons.
-remove the pads near the rear lights (hold on latches, you need to pry near the rear lights).
-in the wheel wells, Unscrew the screws and take out the caps that attach the fender liner, mud flaps and side of the bumper to the wings.
-at the bottom of the bumper take out the caps (inserted from the bottom up).
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español