Despite the external differences between different model years, the bumpers are mounted almost the same.

Front bumper

-open the hood.

-under the hood take out the caps and remove the trim.

-take out two pistons and Unscrew the screw that secures the top of the grille (the grille can be left on).

-behind the grille, we take out four clips (inserted from top to bottom) that secure the upper part of the bumper.

-on the perimeter of the lower part of the bumper, Unscrew the screws (spun up).

-turn the wheels to the side.

-in the wheel wells, Unscrew the screws that secure the fender liner (front).

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors.

Front bumper mounting scheme Toyota 4Runner (2010+)

Front bumper mounting scheme Toyota 4Runner (2010+)

 

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the eight screws and remove the cover of the trunk lid lock.

-on the perimeter of the lower part of the bumper, Unscrew the screws.

-in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner.

-we release the latches in the wings and under the rear lights (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).

Rear bumper mounting scheme Toyota 4Runner (2010+)

Rear bumper mounting scheme Toyota 4Runner (2010+)

Rear bumper mounting scheme Toyota 4Runner (2010+)

Rear bumper mounting scheme Toyota 4Runner (2010+)