Toyota Hilux VII AH10/AH20/AH30 (2004-2015)
Depending on the year of manufacture and body type, the attachment points may differ.
-open the hood
-under the hood, Unscrew the two screws and take out the two pistons that secure the grille.
-remove the grille (the lower part is held on by latches).
-under the grille take out three pistons (inserted from top to bottom).
-around the bottom of the bumper take out the caps and Unscrew the screws (twisted and inserted from the bottom up).
-turn the wheels to the side.
-in the wheel wells, Unscrew the screws that secure the fender liner (front).
-take out one piston on each side (inserted from the bottom up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors (if any).
-open the trunk lid.
-from the bottom side, Unscrew two bolts on each side that secure the bumper amplifier brackets to the body.
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.