-
-
-
Depending on the year of manufacture, the attachment points may differ.
Front bumper
-open the hood.
-take out the caps and remove the trim over the grille.
-under the trim take out two pistons and Unscrew the three screws.
-at the bottom of the bumper, Unscrew the screws (spun up).
-turn the wheels to the side.
-wheel arches take out the caps and release the fender liner (front).
-Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-remove the pads near the rear lights (hold on latches).
-unscrew the two screws in the opening of the trunk.
-at the bottom of the bumper, take out the caps and Unscrew the screws (twisted and inserted from the bottom up).
-wheel arches take out the caps and release the fender liner (rear).
-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español