How to remove front and rear bumper Toyota Tacoma (2005-2015)

Toyota Tacoma II N220/N240/N250/N260/N270 (2005-2015)

Depending on the year of manufacture and body type, the attachment points may differ.

Front bumper

-open the hood.

-under the hood, unscrew the two screws and take out the two pistons, remove the grille (the lower part of the grille is held on by latches).

-under the grille take out three pistons (inserted from top to bottom).

-on the perimeter of the lower part, unscrew the eight screws (spun up).

-turn the wheels to the side.

-wheel arches take out the caps that secure the fender liner (front).

-unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect the fog lamp connectors.

Rear bumper

-unscrew the screws that secure the bumper amplifier brackets to the body.

-release electrical connectors.

-with an assistant, pull the bumper back.

How to remove front and rear bumper Toyota Tacoma (2016+)