Toyota Previa III (XR50), Toyota Estima, Toyota Tarago (2006-2019)
Depending on the year of manufacture and body type, the attachment points may differ.
Front bumper
-open the hood.
-under the hood, Unscrew the three screws that secure the grille.
-take out three pistons behind the grille
-around the bottom of the bumper, Unscrew the screws and take out the caps.
-turn the wheels to the side.
-in the wheel wells take out the caps and release the fender liner (front).
-unscrew the screws that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the two screws that secure the top.
-take out the caps around the perimeter of the lower part of the bumper.
-in the wheel wells, take out the caps and release the fender liner (rear).
-unscrew the screws that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors (if any).
How to remove front and rear bumper Toyota Previa (2000-2005)