How to remove front and rear bumper Toyota MR2 (1999-2007)

Toyota MR2 Spyder, Toyota MR2 Roadster, Toyota MR-S (1999-2007).

Depending on the year of manufacture and body type, the attachment points may differ.

Front bumper

-open the hood.

-under the hood, Unscrew the screws that secure the top.

-on the perimeter of the lower part of the bumper, Unscrew the screws (spun up).

-turn the wheels to the side.

-in the wheel arches, we release the fender liner (front).

-unscrew the screws (spun up) that secure the corners of the bumper to the wings.

-we release the clips in the wings.

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors (if any).

Front bumper mounting scheme Toyota MR2 (1999-2007)

 

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-remove the rear lights.

-unscrew the screws in the opening of the rear lights.

-take out the six caps that secure the top.

-unscrew the screws and take out the caps around the perimeter of the lower part of the bumper.

-in the wheel arches, we release the fender liner (rear).

-unscrew the screws that secure the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).

Rear bumper mounting scheme Toyota MR2 (1999-2007)

Toyota MR2 rear light attachment scheme (1999-2007)