How to remove front and rear bumper Toyota Supra (2019+)

Toyota Supra / GR Supra V A90 (2019+)

Front bumper

-open the hood.

-remove the seal above the bumper.

-under the seal, Unscrew the six screws that secure the top of the bumper.

-on the perimeter of the lower part, unscrew the screws (spun up).

-turn the wheels to the side.

-unscrew in the wheel arches that attach the fender liner (front).

-unscrew two screws on each side (spun down) that secure the sides of the bumper (you need to lift the plastic over the wheel arches).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors.

Rear bumper

-open the trunk lid.

-unscrew the screws and remove the trim over the rear lights (hold on latches).

-under the covers, unscrew the two screws.

-in the wheel wells, unscrew three screws on each side that secure the fender liner.

-move the fender liner to the side and Unscrew one screw on each side that attach the corners of the bumper to the wings.

-at the bottom of the bumper, Unscrew the screws (spun up) and release three latches on each side (near the rear wheels).

-we release the latch in the wings (pull the corners of the bumper towards you) and under the rear lights.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.