-
-
-
Toyota RAV4 V XA50 (2018+)
Depending on the year of manufacture and mounting location may vary.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws that secure the top of the bumper.
-on the perimeter of the lower part, unscrew the eight screws (spun up).
-turn the wheels to the side.
-in the wheel wells, unscrew the screws and take out the caps that secure the fender liner and wing lining (front).
-we release the wing lining from the latches (pull towards you, you can not completely remove it).
-under the lining take out one piston on each side that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-remove the pads near the rear lights (hold on latches).
-in the opening of the trunk, unscrew the four screws.
-unscrew the four screws and remove the rear lights (you can not remove, but it will be more convenient).
-in the wheel wells, unscrew the screws and take out the caps that secure the fender liner, mud flaps and wing lining.
-we release from the latches and remove the lining of the wings (pull towards you).
-under the lining take out one piston on each side that attach the corners of the bumper to the wings.
-at the bottom of the bumper take out the caps and Unscrew the screws.
-we release the latch in the wings (pull the corners of the bumper towards you) and under the rear lights.
-we release the two latches in the opening of the trunk (pull towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español