Depending on the year of release of attachment is different.

Front bumper

-wrenched the wheel to the left or right side depending on which side we will analyze first.

-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner to the bumper.

-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-under the hood take out the caps (inserted from top to bottom) that secure the upper part.

-around the bottom part Unscrew the screws (spun up).

-assistant exempt corners of the latches in the wings and remove the bumper from the guides themselves.

-remove the connector from the fog lamp (if any).

-remove connector from the PDC (if any).

-if you have headlight washers, disconnected the hoses (so the liquid will not escape on earth, should prepare a special container).

mounting locations for front bumper Toyota Yaris (2005-2011)

the scheme of fastening of the front bumper Toyota Yaris (2005-2011)

Rear bumper

-open the trunk lid.

-in the opening of the trunk under the tail lights take out the plugs and Unscrew the screws.

-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner to the bumper.

-(sedan) attach the lockers to the side and Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-on the perimeter in the bottom part Unscrew the screws (spun up).

-assistant free the bumper from the clips in the fenders, under the taillights, in the opening trunk and removable from the guides themselves.

-remove connector from the PDC (if any).

-remove connectors with additional equipment (if any).

the attachment of the rear bumper Toyota Yaris (2005-2011)

diagram of rear bumper Toyota Yaris (2005-2011)

diagram of rear bumper Toyota Yaris (2005-2011)