How to remove the front and rear bumper Toyota Land Cruiser J200

Toyota Land Cruiser J200 (2007-2021)

Depending on the year of manufacture and body type, the attachment points may differ.

Front bumper

-open the hood.

-(if any) under the hood we take out the caps and remove the trim over the grille.

-under the trim, Unscrew the four screws that secure the grille.

-behind the grille we take out three pistons (the grille does not need to be removed) that secure the top of the bumper.

-around the bottom of the bumper take out the caps and Unscrew the screws (twisted and inserted from the bottom up).

-turn the wheels to the side.

-in the wheel arches, take out the caps and Unscrew the screws that secure the fender liner (front) and the sides of the bumper to the wings.

-we release the grille from the latches in the headlights.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look behind the wires and hoses).

-disconnect electrical connectors (if any).

-disconnect the headlight washer hoses (if any).

Rear bumper

-open the trunk.

-remove the upper bumper cover (holds on latches, removed upwards).

-in the opening of the trunk, Unscrew the five screws and take out the four pistons.

-unscrew the screws and take out the caps around the perimeter of the lower part of the bumper.

-in the wheel arches, Unscrew the screws that secure the fender liner (rear) and bumper corners to the wings.

-we release the latches in the wings and under the rear lights (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).

How to remove front and rear bumper Toyota Land Cruiser J100