How to remove front and rear bumper Chevrolet Rezzo (Daewoo Tacuma)

Depending on the year and model of the attachment points are slightly different.

Front bumper

-open the hood.

-under the hood, Unscrew the screws, release the clips and remove the grille.

-around the bottom part Unscrew the screws that secure protection.

-wrenched the wheel to the left or right side depending on which side we will analyze first.

-in the wheel wells, Unscrew the screws and peel the fender liner.

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-Unscrew two screws and one nut on each side and remove the headlights.

-in the openings of the headlight Unscrew four nuts on each side that attach the bumper amplifier.

-pulls the bumper forward together with the amplifier (making sure not to break the wires).

-remove the connectors from the equipment (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the six screws.

-Unscrew the screws in the wheel arches that secure the wheel arch liners and splash guards to the bumper (so as not to remove the wheels, use a ratchet with a nozzle).

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-at the bottom of four pull clips (inserted from the bottom up).

-in the side panels of the trunk opening hatches.

-in the openings for the hatches, Unscrew the bolts (spun down).

-remove the back bumper (don't want to break the wires).

-remove the connectors from the equipment (if any).