-
-
-
Depending on the year and model of the attachment points are slightly different.
Front bumper
-open the hood.
-under the hood take out the six cartridges.
-around the bottom part Unscrew the eight screws.
-wrenched the wheel to the left or right side depending on which side we will analyze first.
-wheel arches take out two pistons on each side.
-attach the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings (gently pull the corners themselves).
-pulls the bumper forward (making sure not to break the wires).
-remove the connectors from the equipment (if any).
Rear bumper
-open the trunk lid.
-remove tail lights.
-for the rear lights, Unscrew the two screws.
-take out the caps and Unscrew the screws (twisted and inserted from the bottom up) that secure the lower part.
-wheel arches take out the caps and Unscrew the screws holding the wheel arches and bumper corners to the wings.
-we release the latch in the wings (gently pull the corners themselves).
-remove the back bumper (don't want to break the wires).
-remove the connectors from the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español