Chevrolet Cavalier (1995-2005) how to remove bumpers.

Chevrolet Cavalier III (1995-2005) (Toyota Cavalier)

Depending on the year of manufacture, the mounting locations may vary slightly.

How to remove the front bumper

-open the hood.

-under the hood, take out the six pistons and remove the trim.

-unscrew the two screws that secure the upper part of the front bumper (take out the three pistons).

-unscrew eight screws along the perimeter at the bottom (twisted from bottom to top).

-turn the wheels to the left or right, depending on which side we will disassemble first.

-in the wheel arches, unscrew the four screws that secure the fender liners.

-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the wings.

-with an assistant, release the corners from the clamps in the wings (pull towards yourself).

-pull the bumper forward.

-disconnect the connector from the fog lights (if equipped).

How to remove the rear bumper

-open the trunk lid.

-we release the side trim of the trunk.

-in the inner part of the wings, unscrew two screws on each side (twisted from top to bottom).

-unscrew the two nuts below the rear lights.

-from the bottom we take out the four pistons that secure the lower part.

-in the wheel arches, unscrew the four screws that secure the sides of the bumper.

-with an assistant, release the latches in the wings (pull the corners toward you) and remove the bumper from the guides backwards.

-remove the license plate light connectors.