Chevrolet Equinox III (2018-2024) how to remove bumpers.

Depending on the year of manufacture, the mounting locations may vary slightly.

How to remove the front bumper

-open the hood.

-under the hood, Unscrew the six screws (spun from top to bottom) that secure the upper part of the front bumper.

-from the bottom, unscrew the eight screws (twisted from bottom to top) that secure the lower part.

-turn the wheels to the side.

-in the wheel arches, unscrew four screws on each side that secure the fender liners (front part).

-move the fender liners to the side and unscrew one screw on each side (twisted from top to bottom) that secure the corners to the wings.

-release the latches in the wings (pull the corners toward you).

-(after 2022) release the latches in the headlights (need to be carefully pryed with a flat object).

-release the fasteners under the hood.

-with an assistant, pull the bumper forward (make sure not to break the wires).

-disconnect the connectors from the electrical equipment.

How to remove the rear bumper

-open the trunk lid.

-in the trunk opening, unscrew the trunk lid stops.

-from the bottom, unscrew the four screws (twisted from bottom to top) that secure the lower part of the rear bumper.

-in the wheel arches, take out and unscrew four screws on each side that secure the fender liners (rear part).

-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.

-release the latches in the wings (pull the corners toward you).

-release the latches under the rear lights.

-release the latches in the trunk opening.

-with an assistant, remove the bumper backwards (make sure not to break the wires).

-disconnect the connectors of the electrical equipment.

How to remove the front and rear bumper of Chevrolet Equinox (2005-2009)

How to remove the front and rear bumper of Chevrolet Equinox II (2010-2017).