Chevrolet Bolt (2016-2023) how to remove bumpers.

Chevrolet Bolt EV (2016-2023)

Depending on the year of manufacture, the mounting locations may vary slightly.

How to remove the front bumper

-open the hood.

-under the hood, unscrew the two screws and take out the four pistons (twisted and inserted from top to bottom) that secure the trim.

-remove the trim and unscrew the two bolts under it (twisted from top to bottom).

-from the bottom, unscrew the twelve screws (twisted from bottom to top) that secure the lower part of the front bumper.

-we release the arch linings from the bumper (they are held on by latches, we pull them towards us from the bottom up).

-in the wheel arches, unscrew four screws on each side that secure the fender liners (front part).

-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.

-release the latches in the wings (pull the corners toward you).

-release the latches under the headlights.

-with an assistant, pull the bumper forward (watch the wires).

-remove the connectors of the electrical equipment.

How to remove the rear bumper

-open the trunk lid.

-in the trunk opening, unscrew the two screws that secure the upper part of the rear bumper.

-from the bottom we take out two pistons and unscrew the two screws (twisted and inserted from the bottom up) that secure the lower part.

-in the wheel arches, unscrew three screws on each side that secure the fender liners (rear part).

-we release the arch lining from the bumper (they are held on by latches, you need to pull it towards you from the bottom up).

-under the arch trims, unscrew one screw on each side that secures the corners to the wings.

-release the latches in the wings (pull the corners toward you).

-release the latches under the rear lights.

-release the latches in the trunk opening.

-with an assistant, carefully pull the bumper back (make sure not to break the wires).

-disconnect the connectors of the electrical equipment.