Chevrolet Avalanche II GMT900 (2007-2013)

Depending on the year of manufacture, the mounting locations may vary slightly.

How to remove the front bumper

-open the hood.

-under the hood, unscrew the six screws that secure the radiator grille and the upper part of the bumper.

-in the wheel arches, unscrew two screws and take out three pistons on each side that secure the fender liners (front part).

-remove the connectors from the fog lights.

-from the bottom side, unscrew one screw on each side (twisted from the engine side), which secure the bumper to the brackets.

-release the latches in the wings (pull the corners toward you).

-with an assistant, pull the bumper forward.

Chevrolet Avalanche II GMT900 (2007-2013) front bumper mounting locations

Chevrolet Avalanche II GMT900 (2007-2013) front bumper mounting diagram

Chevrolet Avalanche II GMT900 (2007-2013) front bumper mounting diagram

 

How to remove the rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-(if any) unscrew the bolts that secure the tow bar to the rear bumper reinforcement.

- I get under the car.

-disconnect the connectors of the electrical equipment.

-unscrew the screws (nuts) that secure the amplifier brackets to the body.

-with an assistant, carefully pull the bumper back.

 mounting locations for the rear bumper Chevrolet Avalanche II GMT900 (2007-2013)

 

How to remove front and rear bumper Chevrolet Avalanche (2002-2006)