Depending on the year of manufacture, the mounting locations may vary slightly.
How to remove the front bumper
-open the hood.
-under the hood, take out two pistons and unscrew the eight screws (TORX) that secure the upper part of the front bumper. Remove the two plastic covers (pull up).
-from the bottom, unscrew ten bolts and take out two pistons (twisted and inserted from bottom to top) that secure the lower part.
-turn the wheels out, depending on which side we will disassemble (it will be more convenient if the wheels are removed).
-in the wheel arches, unscrew four screws on each side (TORX) that secure the fender liners (front part).
-move the fender liners to the side and unscrew five screws on each side (the screws are difficult to access, you will need a socket head with a ratchet) that secure the sides to the wings.
-with an assistant, carefully pull the bumper forward from the guides in the wings (make sure not to break the wires).
-remove the connectors from the electrical equipment.
How to remove the rear bumper
-open the trunk lid.
-above the rear lights, pull out three pistons on each side and remove the covers.
-from the bottom side, unscrew four screws on each side (twisted from bottom to top).
-in the wheel arches, unscrew three screws on each side (TORX) that secure the fender liners (rear part).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-release the latches in the wings (pull the corners toward you).
-release the latches under the rear lights.
-release the latches in the trunk opening.
-with an assistant, pull the bumper back (make sure not to break the wires).
-disconnect the connectors of the electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español 
