Chevrolet Avalanche I (2002-2006)

Depending on the year of manufacture, the mounting locations may vary slightly.

How to remove the front bumper

-open the hood.

-under the hood we take out the seven pistons that secure the radiator grille.

-below the headlights, release the clamps and remove the radiator grille.

-from the bottom, unscrew the four bolts (screwed from bottom to top).

-turn the wheels to the side.

-in the wheel arches, unscrew four screws on each side that secure the corners to the fender liners.

-release the fasteners in the wings (marked with blue arrows, pull the corners towards you).

-we release the latches under the radiator grill (indicated by blue arrows, you need to press with a flat screwdriver and pull towards yourself).

-with an assistant, carefully pull the bumper forward (watch the wires).

-disconnect the connectors of the electrical equipment (if any).

mounting locations for the front bumper Chevrolet Avalanche I (2002-2006)

Chevrolet Avalanche I (2002-2006) radiator grille mounting diagram

Chevrolet Avalanche I front bumper mounting diagram (2002-2006)

 

How to remove the rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-(if any) unscrew the bolts that secure the tow bar to the rear bumper reinforcement.

-from the bottom, unscrew two bolts and two nuts on each side that secure the amplifier brackets to the body.

-take out the fixing brackets (to which the nuts were screwed).

-disconnect the connectors of the electrical equipment.

-with an assistant, carefully pull the bumper back.

mounting locations for the rear bumper Chevrolet Avalanche I (2002-2006)

Rear bumper mounting diagram for Chevrolet Avalanche I (2002-2006)

 

How to remove front and rear bumper Chevrolet Avalanche (2007-2013)