-
-
-
Depending on the year of manufacture, the attachment points may differ slightly.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws that secure the top of the bumper.
- (if any) in the lower grille, in the bumper, unscrew the two screws.
-turn the wheels to the side.
-Unscrew four screws on each side in the wheel arches that secure the wheel arches (front part).
- behind the wheel arch liners, Unscrew one screw (piston) on each side that secure the corners of the bumper to the fenders.
-Now, in the wheel arches, you need to pull the metal fixing bar (on each side), the blue arrow in the diagram.
-under the hood, release the two latches near the hood lock.
-with an assistant, carefully pull the bumper forward from the guides in the wings (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid (doors).
- (if there is parking sensors) on the right side of the trunk, remove the side trim and disconnect the parking sensors behind it.
-in the wheel arches, Unscrew three screws on each side.
-from the bottom side, Unscrew the eight nuts that secure the bumper reinforcement to the body.
-release the latches in the wings (pull the corners towards you).
-pulls the bumper back (look behind the wires).
English 
Italiano 
Français 
русский 
Deutsch 
Español