Front bumper

-Unscrew the wheel to the left or right side, depending on which side of the bed will be dismantled.

-wheel arches Unscrew the screws that attach the fender liner to the bumper.

-open the hood and remove the grille (held by the latches).

-under the grille, Unscrew the bolts (spun down).

-Unscrew the five bolts below the license plate and fog light (spun upwards).

-pulls the bumper from the guides themselves.

-remove the connectors from the fog lamps and turn indicators.

the attachment of the front bumper VW Golf 3 (vento)

the scheme of fastening of the front bumper VW Golf 3 (vento)

Rear bumper

-open the boot lid and Unscrew the four bolts.

-at the bottom of the car, the corners Unscrew two bolts on each side (spun upwards).

-pulls the bumper back from the rails.

-the bumper is cleared.

the attachment of the front bumper VW Golf 3 (vento)

diagram of rear bumper VW Golf 3 (vento)