-under the hood, Unscrew the screws that secure the grille.
-remove from latches to the lower part of the grille.
-if the bars need to be removed completely, remove the lever opening the hood. Throws up on the latch with a flat head screwdriver and bred ears that hold the lever to the castle.
-under the grille, Unscrew the screws under the asterisk.
-remove the direction indicator. Behind the headlights remove the springs with claws and pushes the turn signal in front with the guides.
-Unscrew the screws under the turn signal.
-Unscrew the wheel to the left or right side, depending on which side of the bed will be dismantled.
-wheel arches Unscrew the screws that attach the fender liner to the bumper.
-move the wing flaps to the side and Unscrew the screws that attach the bumper to the wings.
-Unscrew lower bolts that attach the bumper to protect the engine.
-pulls the bumper rails in the front (better to do it with a helper so as not to scratch the paint on the wings).
-you can now unplug the connectors from the fog lights (if any).
-remove connector from the PDC (if any).
- if there is paramilitary disconnect the hoses from the injectors and close them with stoppers that from the reservoir was leaking fluid.
Rear bumper
-wheel arches Unscrew the screws that attach the fender liner to the bumper (so as not to remove the wheels, you can use a ratchet with a nozzle).
-in the trunk under the plugs in the casings Unscrew three nuts on each side and remove the tail lights.
-Unscrew the screws under the rear lights.
-Unscrew the screws around the perimeter at the bottom of the bumper (spun upwards).
-pulls the bumper back with the grooves (do it better with an assistant, so as not to scratch the paint on the wings).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
